OSHA Health & Safety Construction-related Regulations

 

OSHA Construction Resource Manual Table of Contents PART 1903 - INSPECTIONS, CITATIONS AND PROPOSED PENALTIES Sec 1903.2 Posting of notice; availability of the Act, regulations and applicable standards 1903.3 Authority for inspection 1903.7 Conduct of inspections 1903.8 Representatives of employers and employees 1903.14 Citations; notices of de minimis violations; policy regarding employee rescue activities PART 1904 - RECORDING AND REPORTING OCCUPATIONAL INJURIES AND ILLNESSES Sec 1904.1 Purpose and scope 1904.2 Log and summary of occupational injuries and illnesses 1904.3 Period covered 1904.4 Supplementary record 1904.5 Annual summary 1904.6 Retention of records 1904.7 Access to records 1904.8 Reporting of fatality or multiple hospitalization incidents 1904.9 Falsification, or failure to keep records or reports 1904.10 Recordkeeping under approved State plans 1904.11 Change of ownership 1904.12 Definitions 1904.13 Petitions for recordkeeping exceptions 1904.14 Employees not in fixed establishments 1904.15 Small employers 1904.16 Establishments Classified in Standard Industrial Classification Codes (SIC) 52-89, (except 52-54, 70, 75, 76, 79 and 80) PART 1910 - GENERAL INDUSTRY   1910.12 Construction Work PART 1926 - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Subpart A - General Sec 1926.1 Purpose and scope 1926.2 Variances from safety and health standards 1926.3 Inspections - right of entry 1926.4 Rules of practice for administrative adjudications for enforcement of safety and health standards 1926.5 OMB control numbers under the Paperwork Reduction Act Subpart B - General Interpretations   1926.10 Scope of subpart 1926.11 Coverage under section 103 of the act distinguished 1926.12 Reorganization Plan No 14 of 1950 1926.13 Interpretation of statutory terms 1926.14 Federal contracts for "mixed" types of performance 1926.15 Relationship to the Service Contract Act; Walsh-Healey Public Contracts Act 1926.16 Rules of construction Subpart C - General Safety and Health Provisions   Overview for Subpart C Safety and Health Program Management Guidelines Construction Focused Inspections Initiative 1926.20 General safety and health provisions 1926.21 Safety training and education 1926.22 Recording and reporting of injuries [Reserved] 1926.23 First aid and medical attention 1926.24 Fire protection and prevention 1926.25 Housekeeping 1926.26 Illumination 1926.27 Sanitation 1926.28 Personal protective equipment 1926.29 Acceptable certifications 1926.30 Shipbuilding and ship repairing 1926.31 Incorporation by reference 1926.32 Definitions 1926.33 Access to employee exposure and medical records 1926.34 Means of egress 1926.35 Employee emergency action plans Compliance Guidance for Subpart C STD 3-1.1 Citation Policy Regarding 29 CFR 1926.20, 29 CFR 1926.21 and Related General Safety Provisions Subpart D - Occupational Health and Environmental Controls   Overview for Subpart D 1926.50 Medical services and first aid 1926.51 Sanitation 1926.52 Occupational noise exposure 1926.53 Ionizing radiation 1926.54 Nonionizing radiation 1926.55 Gases, vapors, fumes, dusts, and mists 1926.56 Illumination 1926.57 Ventilation 1926.58 [Reserved] 1926.59 Hazard communication 1926.60 Methylenedianiline 1926.61 Retention of DOT markings, placards and labels 1926.62 Lead 1926.63 Cadmium (This standard has been redesignated as 1926.1127) 1926.64 Process safety management of highly hazardous chemicals 1926.65 Hazardous waste operations and emergency response 1926.66 Criteria for design and construction for spray booths Compliance Guidance for Subpart D CPL 2-2.53 Guidelines for First Aid Training Programs STD 1-8.2 29 CFR 1910.151(c) Medical Service and First Aid; 29 CFR 1926.50 and .51, Medical Service and First Aid, and Sanitation, Respectively, Applicable to Electric Storage Battery Charging and Maintenance Areas Interpretation 29 CFR 1926.50 -- Medical Services and First Aid Interpretation 29 CFR 1926.54 -- Nonionizing Radiation Subpart E - Personal Protective and Life Saving Equipment   Overview for Subpart E 1926.95 Criteria for personal protective equipment 1926.96 Occupational foot protection 1926.97 [Reserved] 1926.98 [Reserved] 1926.99 [Reserved] 1926.100 Head protection 1926.101 Hearing protection 1926.102 Eye and face protection 1926.103 Respiratory protection 1926.104 Safety belts, lifelines, and lanyards 1926.105 Safety nets 1926.106 Working over or near water 1926.107 Definitions applicable to this subpart Compliance Guidance for Subpart E CPL 2-2.29 29 CFR 1910.134(e)(5) -- Respirator Fit-Testing CPL 2-2.54 Respiratory Protection Program Manual STD 1-6.5 Exemption for Religious Reasons from Wearing Hard Hats Subpart F - Fire Protection and Prevention   Overview for Subpart F 1926.150 Fire protection 1926.151 Fire prevention 1926.152 Flammable and combustible liquids 1926.153 Liquefied petroleum gas (LP-Gas) 1926.154 Temporary heating devices 1926.155 Definitions applicable to this subpart 1926.156 Fixed extinguishing systems, general 1926.157 Fixed extinguishing systems, gaseous agent 1926.158 Fire detection systems 1926.159 Employee alarm systems Compliance Guidance for Subpart F STD 3-4.1A De Minimis for Absence of a Flame Arrestor Screen in a Safety Can Subpart G - Signs, Signals, and Barricades   1926.200 Accident prevention signs and tags 1926.201 Signaling 1926.202 Barricades 1926.203 Definitions applicable to this subpart Subpart H - Materials Handling, Storage, Use, and Disposal   1926.250 General requirements for storage 1926.251 Rigging equipment for material handling 1926.252 Disposal of waste materials Subpart I - Tools - Hand and Power   1926.300 General requirements 1926.301 Hand tools 1926.302 Power operated hand tools 1926.303 Abrasive wheels and tools 1926.304 Woodworking tools 1926.305 Jacks - lever and ratchet, screw and hydraulic 1926.306 Air Receivers 1926.307 Mechanical power-transmission apparatus Compliance Guidance for Subpart I STD 1-12.26A Abrasive Operations Using Cutoff Wheels and Masonry Saws STD 1-13.4 Portable Belt Sanding Machines as Covered by 29 CFR 1910.243(a)(3) and 1926.304(f) Subpart J - Welding and Cutting   Overview for Subpart J 1926.350 Gas welding and cutting 1926.351 Arc welding and cutting 1926.352 Fire prevention 1926.353 Ventilation and protection in welding, cutting, and heating 1926.354 Welding, cutting and heating in way of preservative coatings Compliance Guidance for Subpart J STD 3-8.1 Welding, Cutting or Heating of Metals Coated with Lead-Bearing Paint STD 3-8.2 29 CFR 1926.350(a)(9) Securing of Compressed Gas Cylinders Subpart K - Electrical   Overview for Subpart K General 1926.400 Introduction 1926.401 [Reserved] Installation Safety Requirements 1926.402 Applicability 1926.403 General requirements 1926.404 Wiring design and protection 1926.405 Wiring methods, components, and equipment for general use 1926.406 Specific purpose equipment and installations 1926.407 Hazardous (classified) locations 1926.408 Special systems 1926.409 [Reserved] 1926.410 [Reserved] 1926.411 [Reserved] 1926.412 [Reserved] 1926.413 [Reserved] 1926.414 [Reserved] 1926.415 [Reserved] Safety-Related Work Practices 1926.416 General requirements 1926.417 Lockout and tagging of circuits 1926.418 [Reserved] 1926.419 [Reserved] 1926.420 [Reserved] 1926.421 [Reserved] 1926.422 [Reserved] 1926.423 [Reserved] 1926.424 [Reserved] 1926.425 [Reserved] 1926.426 [Reserved] 1926.427 [Reserved] 1926.428 [Reserved] 1926.429 [Reserved] 1926.430 [Reserved] Safety-Related Maintenance and Environmental Considerations 1926.431 Maintenance of equipment 1926.432 Environmental deterioration of equipment 1926.433 [Reserved] 1926.434 [Reserved] 1926.435 [Reserved] 1926.436 [Reserved] 1926.437 [Reserved] 1926.438 [Reserved] 1926.439 [Reserved] 1926.440 [Reserved] Safety Requirements for Special Equipment 1926.441 Battery locations and battery charging 1926.442 [Reserved] 1926.443 [Reserved] 1926.444 [Reserved] 1926.445 [Reserved] 1926.446 [Reserved] 1926.447 [Reserved] 1926.448 [Reserved] Definitions 1926.449 Definitions applicable to this subpart Subpart L - Scaffolds   1926.450 Scope, application and definitions applicable to this subpart 1926.451 General requirments 1926.452 Additional requirements applicable to specific types of scaffolds 1926.453 Aerial lifts 1926.454 Training APPENDIX A TO SUBPART L - SCAFFOLD SPECIFICATIONS APPENDIX B TO SUBPART L - CRITERIA FOR DETERMINING THE FEASIBILITY OF PROVIDING SAFE ACCESS AND FALL PROTECTION FOR SCAFFOLD ERECTORS AND DISMANTLERS APPENDIX C TO SUBPART L - LIST OF NATIONAL CENSENSUS STANDARDS APPENDIX D TO SUBPART L - LIST OF TRAINING TOPICS FOR SCAFFOLD ERECTORS AND DISMANTLERS APPENDIX E TO SUBPART L - DRAWINGS AND ILLUSTRATIONS   Compliance Guidance for Subpart L STD 3-10.2 29 CFR 1926.451(i)(8), Multistage Suspension Scaffolds STD 3-10.3 29 CFR 1926.451(a)(5 Scaffolding, General Requirements Guardrails STD 3-10.4 29 CFR 1926.451, Scaffolding Subpart M - Fall Protection   Overview for Subpart M 1926.500 Scope, application, and definitions applicable to this subpart 1926.501 Duty to have fall protection 1926.502 Fall protection systems criteria and practices 1926.503 Training requirements APPENDIX A TO SUBPART M - DETERMINING ROOF WIDTHS APPENDIX B TO SUBPART M - GUARDRAIL SYSTEMS APPENDIX C TO SUBPART M - PERSONAL FALL ARREST SYSTEMS APPENDIX D TO SUBPART M - POSITIONING DEVICE SYSTEMS APPENDIX E TO SUBPART M - SAMPLE FALL PROTECTION PLANS   Compliance Guidance for Subpart M STD 3.1 Interim Fall Protestion Compliance Guidelines for Residential Construction Interpretation 29 CFR 1926.500-503 -- Interpretations and Clarifications Subpart M -- Fall Protection M-57 Memo Fall Protection Plans -- Enforcement Policy Letter Final Rule Subpart N - Cranes, Derricks, Hoists, Elevators, and Conveyors   1926.550 Cranes and derricks 1926.551 Helicopters 1926.552 Material hoists, personnel hoists and elevators 1926.553 Base-mounted drum hoists 1926.554 Overhead hoists 1926.555 Conveyors *1926.556 [Removed] Compliance Guidance for Subpart N STD 3-12.1A 29 CFR 1926.550(a)(15)(i) Clearance Between Electrical Power Lines and Cranes STD 3-12.2 Uniformity in Interpretation of 29 CFR 1926.550(a)(9) STD 3-12.4 Overhead and Gantry Cranes, and Derricks -- Normal Operating Conditions, CFR 1910.179(e)(6)(i), CFR 1910.179(g)(2)(i), and CFR 1910.181(j)(1)(i); CFR 1926.550(d)(4) and CFR 1926.550(e) Subpart O - Motor Vehicles, Mechanized Equipment, and Marine Operations   1926.600 Equipment 1926.601 Motor vehicles 1926.602 Material handling equipment 1926.603 Pile driving equipment 1926.604 Site clearing 1926.605 Marine operations and equipment 1926.606 Definitions applicable to this subpart Compliance Guidance for Subpart O STD 3-13.2 29 CFR 1926.605(a)(1) as Applied to Marine Construction Subpart P - Excavations   Overview for Subpart P 1926.650 Scope, application, and definitions applicable to this subpart 1926.651 Specific Excavation Requirements 1926.652 Requirements for protective systems APPENDIX A TO SUBPART P - SOIL CLASSIFICATION APPENDIX B TO SUBPART P - SLOPING AND BENCHING APPENDIX C TO SUBPART P - TIMBER SHORING FOR TRENCHES APPENDIX D TO SUBPART P - ALUMINUM HYDRAULIC SHORING FOR TRENCHES APPENDIX E TO SUBPART P - ALTERNATIVES TO TIMBER SHORING APPENDIX F TO SUBPART P - SELECTION OF PROTECTIVE SYSTEMS   Compliance Guidance for Subpart P Memo Suspension of 29 CFR 1926.652 to House Foundation/Basement Excavations Subpart Q - Concrete and Masonry   Overview for Subpart Q Construction 1926.700 Scope, application, and definitions, applicable to this subpart 1926.701 General requirements 1926.702 Requirements for equipment and tools 1926.703 Requirements for cast-in-place concrete 1926.704 Requirements for precast concrete 1926.705 Requirements for lift-slab construction operations