EHSO home page - Free Environmental Health & Safety information, guidance and downloads of regulations and manuals online for home or EHS professional.

Environment, Health and Safety Online

The site for free, objective information you can use! 

Free information for the general public and  EHS professionals


Search the site




Who are we?  - How to get helpFAQs  -  Quick links: Today's Federal Register  - Contact Info: EPA  - State agencies - OSHA - DOT   Regs: Search Government regs and sites Data: Search EPA databases

Causes and Control of Water Pollution
 in Wetlands

Back to the Water Pollution Causes Page

What Are Some Activities That Lead to the Destruction of Wetlands and Riparian Areas ?

Changes to hydrology, geochemistry, substrate, or species
composition may impair the ability of a  wetland or riparian area to
function properly. Such alterations can affect the ability of the
wetland or riparian area to act as a filter for excess sedimentation
and nutrients, which can result in deteriorated surface water
quality.  The following are examples of typical activities that
often cause such impairment: the drainage of wetlands for additional
cropland, overgrazing, construction of highways, channelization of
an adjoining waterway, deposition of dredged material, and
excavation for ports and marinas.   


THE PROTECTION OF WETLANDS AND RIPARIAN AREAS -- The purpose of this management measure is to maintain the water quality benefits of wetlands and riparian areas and to ensure that they do not in turn become a source of nonpoint pollution due to degradation.  Wetlands and riparian zones reduce nonpoint source pollution by filtering out of solution NPS-related contaminants such as phosphorus and nitrogen.  The ability of wetlands and riparian zones to perform this function is determined by the vegetative composition, geochemistry, and faunal species composition.  Any changes to these characteristics could affect filtering capacities.

THE RESTORATION OF WETLANDS AND RIPARIAN AREAS -- This measure promotes the restoration of preexisting wetland and riparian areas
where the restoration of such systems will have a significant nonpoint source pollution abatement unction.  This measure is intended to address the increase in pollutant loadings that can result from degradation or destruction of wetlands and riparian areas.  These areas are effective in removing several pollutants
from stormwater, such as sediment, nitrogen, and phosphorus.  Wetland and riparian areas also help to attenuate flows from higher-than-average storm events, thereby protecting downstream areas from impacts such as channel scour, streambank erosion, and fluctuations in temperature and chemical characteristics.  This can be accomplished by reestablishing previous hydrologic dynamics, vegetation, and structural characteristics.

ENGINEERED VEGETATED TREATMENT SYSTEMS -- The purpose of vegetated filter strips is to remove sediment and other pollutants from runoff
and wastewater by filtration, deposition, infiltration, absorption, adsorption, decomposition, and volatilization, thereby reducing the amount of pollution entering adjacent waterbodies.  The ability of a wetland to act as a sink for phosphorus and the ability to convert nitrate to nitrogen gas through denitrification are two examples of the important NPS pollution abatement functions performed by constructed wetlands.  This measure promotes the development of artificial wetlands or vegetated treatment systems where these
systems will serve a nonpoint source pollution abatement function. 

Back to top

This page was updated on 23-Jan-2020