Mercury is a toxic substance. Exposure to mercury may result in severe damage to the nervous and reproductive systems and may ultimately be fatal. Common symptoms of mercury poisoning are poor coordination and altered sensory perception. Pregnant women and children are especially vulnerable to mercury exposure. The most common cause of mercury poisoning in the United States is the consumption of fish contaminated with methylmercury. For this reason, EPA sets a maximum contaminant level for mercury in drinking water and works with the states to issue consumption advisories.
When liquid mercury (also known as elemental or metallic mercury) is spilled, it forms droplets that can accumulate in the tiniest of spaces and then emit vapors into the air. Mercury vapor in the air is odorless, colorless, and very toxic. Most mercury exposures occur by breathing vapors, by direct skin contact or by eating food or drinking water contaminated with mercury.
Health problems caused by mercury depend on how much has entered your body, how it entered your body, how long you have been exposed to it, and how your body responds to the mercury. All mercury spills, regardless of quantity, should be treated seriously.
Click here for:
National Mercury Information
|There are three different procedures to address mercury spills.|
Note: in a laboratory, if you have access to powdered zinc and a weak acid, you can make an amalgam of the spilled mercury by sprinkling on the powdered zinc and blotting with a sponged wetted with a diluted HCl solution - be sure to wear impervious gloves!
with a mercury spill
Items needed to clean up a small mercury spill
|1.- Put on rubber or latex gloves.|
2.- If there are any broken pieces of glass or sharp objects, pick them up with care. Place all broken objects on a paper towel. Fold the paper towel and place in a zip lock bag. Secure the bag and label it as directed by your local health or fire department.
|3.- Locate visible mercury beads. Use a squeegee or cardboard to gather mercury beads. Use slow sweeping motions to keep mercury from becoming uncontrollable. Take a flashlight, hold it at a low angle close to the floor in a darkened room and look for additional glistening beads of mercury that may be sticking to the surface or in small cracked areas of the surface. Note: Mercury can move surprising distances on hard-flat surfaces, so be sure to inspect the entire room when "searching."|
|4.- Use the eyedropper to collect or draw up the mercury beads. Slowly and carefully squeeze mercury onto a damp paper towel. Place the paper towel in a zip lock bag and secure. Make sure to label the bag as directed by your local health or fire department.|
5.- After you remove larger beads, put shaving cream on top of small paint brush and gently "dot" the affected area to pick up smaller hard-to-see beads. Alternatively, use duct tape to collect smaller hard-to-see beads. Place the paint brush or duct tape in a zip lock bag and secure. Make sure to label the bag as directed by your local health or fire department.
|6.- OPTIONAL STEP: It is OPTIONAL to use commercially available powdered sulfur to absorb the beads that are too small to see. The sulfur does two things: (1) it makes the mercury easier to see since there may be a color change from yellow to brown and (2) it binds the mercury so that it can be easily removed and suppresses the vapor of any missing mercury. Where to get commercialized sulfur? It may be supplied as mercury vapor absorbent in mercury spill kits, which can be purchased from laboratory, chemical supply and hazardous materials response supply manufacturers.|
|Note: Powdered sulfur may stain fabrics a dark color. When using powdered sulfur, do not breathe in the powder as it can be moderately toxic. Additionally, users should read and understand product information before use. |
If you choose not to use this option, you may want to request the services of a contractor who has monitoring equipment to screen for mercury vapors. Consult your local environmental or health agency to inquire about contractors in your area.
|7.- Place all materials used with the cleanup, including gloves, in a trash bag. Place all mercury beads and objects into the trash bag. Secure trash bag and label it as directed by your local health or fire department.|
|8.- Contact your local health department, municipal waste authority or your local fire department for proper disposal in accordance with local, state and federal laws.|
|9.- Remember to keep the area well-ventilated to the outside (i.e., windows open and fans running) for at least 24 hours after your successful cleanup. Continue to keep pets and children out of cleanup area. If sickness occurs, seek medical attention immediately. EPA's Mercury Web site presents information on health effects related to exposures to vapors from metallic mercury. For additional information on health effects, the Agency for Toxic Substances and Disease Registry (ATSDR) provides a Mercury Fact Sheet that also presents information on health effects related to exposures to vapors from metallic mercury.|
|Recommendation: If there are young children or pregnant women in the house, seek additional advice from your local or state health or state environmental agency.|
|1.- Isolate the area.|
|2.- Turn down temperature.|
|3.- Open windows.|
|4.- Don't let anyone walk through the mercury.|
|5.- Don't vacuum.|
|6.- Contact your local or state health or state environmental agency.|
|Any time one pound or more of mercury is released to the environment, it is mandatory to call the National Response Center (NRC). The NRC hotline operates 24 hours a day, 7 days a week. Call (800) 424-8802. Note that because mercury is heavy, only two tablespoons of mercury weigh about one pound|
|Many states provide more detailed step-by-step instructions on how to contain a mercury spill and, in the case of small spills, how to clean it up yourself, as well as on available cleanup contractors and proper disposal of collected mercury. Examples are:|
The links below may take you out of the EPA.gov domain and to external links.
The Mercury Response Guidebook, by EPA’s Emergency Response Team and EPA Region 5, is designed to assist emergency and remedial professionals coordinate and clean up indoor mercury spills. The principles in this guidebook can also be used at other mercury-contaminated sites.
Choose from the questions below to learn more about the treatment, disposal, and long-term management of elemental mercury and mercury wastes.
Why Mercury is a Concern
Sources of Mercury and How You Can Be Exposed
Mercury Spills, Leaks, Disposal, and Collection Programs
Learn more about mercury by visiting EPA’s main mercury Web site.
Browse these EPA Poisoning subtopics
Accident Investigations, Accident Preparedness, Accident Prevention, Chemical Accidents, Radiation Accidents
|Emergency Preparedness |
This page was updated on 30-Mar-2016